BIOS for Asus M5A97 R2.0 motherboard with support for NVME SSDs

Introduction

I use a Asus M5A97 R2.0 motherboard and recently bought an NVME SSD from AliExpress.Unfortunately the NVME SSD was not found by the UEFI firmware, and booting from the SSD was not possible.

After searching the Internet, I found a page where someone was able to modify a BIOS update image to include the NVME driver for the SSD. This UEFI driver can also be included in the BIOS image for the Asus M5A97 R2.0 motherboard. After including it and flashing I was able to boot from the SSD.

This page describes the steps to take to update and flash the BIOS image.

Including the SSD driver in the BIOS image (optional, see download in the next section)

You will need:

First, extract the UBU rar file and start MMTool.exe, click on "Load Image" and select the M5A97-R20-ASUS-2603.CAP file. Next, Click on the Browse option, next to "Module file". Select the NvmExpressDxe_4.ffs file. In the "Vol. Index" field, enter: 03. Click the Insert button. Save the new BIOS image file as: M5A97R20.CAP

Flashing the new BIOS image

Insert the FAT32 formatted USB stick and copy the new BIOS image, M5A97R20.CAP, to it. Note: the name of the file is important for flashing using the BIOS flashback method. Insert the USB stick into the BIOS flashback port (see the motherboard manual, lowest USB port below the network interface for the M5A97 R2.0).

Flashback_USB_Port.png

Make sure your PC is turned off and keep pressing the BIOS flashback button on the motherboard for about 3 seconds. The BIOS flashback LED should now start blinking, which means it is being installed. I think it is blinking slow when the BIOS file is being read from USB and fast when it is being written to the motherboard. When the blinking stops, your new BIOS image has been installed (this can take up to 8 minutes). Turn on your PC, check the BIOS settings and see if the NVME SSD is recognized by UEFI.

Notes

Please note it is possible to create a BIOS update file which contains drivers for both NVME and Samsung XP941 SSDs. Insert both NvmExpressDxe_4.ffs and samsung-m2-dxe into the BIOS update file and flash it using the flashback method. See also: M5A97R20SamsungBIOS

Download M5A97R20-BOTH.CAP. Rename this file to M5A97R20.CAP before flashing.

More information

See the following links for more information:

-- Ivo van Geel - 26 Dec 2017

Edit | Attach | Watch | Print version | History: r4 < r3 < r2 < r1 | Backlinks | Raw View | More topic actions...
Topic revision: r3 - 13 Oct 2020 - IvoVanGeel
 
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2010-2019 by LANIS